Logo for IndustrialFloorTiles.co.uk


For assistance or advice phone 01329 841416 (M-F 08:00 to 16:30) or email us sales@industrial-floor-tiles.co.uk


Interlocking Floor Tiles -
for Warehouse & Factory floors.



Tough tiles for heavy duty applications.

Designed to take high static or dynamic loads.

Ideal for material movement / stores applications.

Walkways, work zones etc can be easily colour coded.

Lay a big floor quickly - reducing down time.

Tiles resist abrasion, impacts & chemicals.

Interlock design resists liquid penetration.

Reduced noise, vibration & heat loss.

Manufactured to EN standards.

Easy tile replacement or movement.

Floor is fully recycleable at end of life. 

New floor with PVC interlocking tiles.



Interlocking tiles manufactured from recycled PVC materials.


Recycled PVC Tiles can use either matching Recycled PVC Edge Ramps or contrasting, coloured (New PVC) Edge Ramps.


Save Money, Save Time

Price-per-tile has a big cost impact on a big floor area. We are always ready to negoitiate bulk discounts for volume sales - call us for a quote.

Though quicker than applying paint or coatings interlocking tiles still take some time to install but using well manfactured tiles reduces tile laying time to a minimum.

In the longer run these tiles also save cost and disruption because they have been designed - and tested - to last.

For example, tiles are tested to EN 423 to withstand petrol, diesel and weak acids - properties that matter where plant or vehicles are operated, stored or maintained. (See table below for full test specs.)

Designed for floors with high static or dynamic load rates, for example warehouse floors with racking and fork-lift trucks operating.

The floor is easy to maintain and repair, non slip, non-trip and stain resistant.

Tiles are easy to move / re-use / dispose of.

Floor cleaning & maintenance is inexpensive.

Colour and Face Pattern OptionsMotolock tile colour variants.

Dimensions: 495 x 495 x 7mm  :  Weight: 2.2 kg  : Compressive strength: 520 kg/cm2 (EN ISO 15451)

Tile Edging

We supply Interlocking Edging Tiles in matching colours, patterns and materials as the floor tiles.

Edge tiles / ramps are essential to create a safe anti-trip edge to the floor and improve access for wheechairs, buggys, sack trucks etc.

They also reinforce and protect the floor at vehicle access points e.g. warehouse entrances.

Interlocking Edge Tiles in new and recycled PVC.




Get a Quote / Ask a Question


Practical Design.

Tiles insulate against sound, vibration and thermal loss and will handle heavy vehicle traffic and loads.

The tiles are resistant to abrasion, impact and the penetration of liquids including oils, solvents, etc. - see the Test Certification' table.

The underside 'Air Flow' design makes the tiles tolerant of under-layer moisture, prevents accumulation of water and allows the floor to breathe.

Air Flow design allows under-floor moisture to evaporate.


Floor Pattern Designer:

Try out floor patterns / designs using our floor designer app.


Fitting Tiles.

Interlocking tiles snap together quickly and to create a ready-to-use, durable floor.

No steam cleaning, degreasing, screeding or membranes needed before laying the tiles.

Eliminate problems with floor paint delamination, dust, rising cold / damp and time consuming repairs for other flooring options.

Just snap the tiles together and lay them over any reasonably smooth and level concrete underfloor.

Colour coding for walkways, drop zones etc is easily to incorportate (or change) using interlocking tiles.



Test Certificates ticked

Floor Tile EN Certifications.


Please contact us prior to placing your orders.
If you have not contacted us for technical advice prior to placing your orders. You do so with the risk of the product not being suitable for application and we therefore hold no responsibility for the actual use or performance of our product.