Note: This tile estimation and cost comparison tool shows the approximate number of uncut tiles required for the dimensions input and guideline prices for a floor based on the different tile types. Costs are rounded to the nearest £. Where the floor dimensions require a mix of cut and full tiles to be used the exact quantity of tiles needed may be higher or lower than the estimate given here - depending on the type of tile interlock. If in doubt contact us with your floor dimensions and we will work out the exact quantities required.
Just fill in your floor measurements and click Calculate to get information on the amount of floor tiles you require and an instant cost. All prices exclude VAT. Important: Enter measurements in mm
We quote Motolock and Motomat tile requirements based on an inside edge to outside edge measurement. The MotoVent tile requirements are based on the inside to inside edge measurement.
We have found that this improves estimating accuracy. Other dimensions, which take account of 1) all tabs and 2) no tabs, are also shown below.
Tile Type |
Outside to Outside (mm) |
Inside to Inside (mm) |
Inside to Outside (mm) |
||
MotoLock |
510 x 510 |
480 x 480 |
495 x 495 |
||
MotoMat |
495 x 495 |
445 x 445 |
470 x 470 |
Tile Type |
Inside to Outside (mm) |
Inside to Inside (mm) |
||
MotoVent |
404 x 404 |
400 x 400 |
PLEASE NOTE: If you have not contacted us for technical advice prior to placing your orders. You do so with the risk of the product not being suitable for application and we therefore hold no responsibility for the actual use or performance of our product.